Evolution of surface morphology of Er:YAG laser-machined human bone

Evolution of surface morphology of Er:YAG laser-machined human bone:

Abstract

The extensive research on the laser machining of the bone has been, so far, restricted to drilling and cutting that is one- and two-dimensional machining, respectively. In addition, the surface morphology of the laser machined region has rarely been explored in detail. In view of this, the current work employed three-dimensional laser machining of human bone and reports the distinct surface morphology produced within a laser machined region of human bone. Three-dimensional laser machining was carried out using multiple partially overlapped pulses and laser tracks with a separation of 0.3 mm between the centers of consecutive laser tracks to remove a bulk volume of the bone. In this study, a diode-pumped pulse Er:YAG laser (λ = 2940 nm) was employed with continuously sprayed chilled water at the irradiation site. The resulting surface morphology evolved within the laser-machined region of the bone was evaluated using scanning electron microscopy, energy dispersive spectroscopy, and X-ray micro-computed tomography. The distinct surface morphology involved cellular/channeled scaffold structure characterized by interconnected pores surrounded by solid ridges, produced within a laser machined region of human structural bone. Underlying physical phenomena responsible for evolution of such morphology have been proposed and explained with the help of a thermokinetic model.